An online forum for spearfishermen around the world.
malibujohn wrote:Got a lil pile of blanks with tracks and pockets in em. Come grab what ya need aquaman!
mori wrote:You should make one. Hybrid guns are the among the most easiest spearguns to make for a home builder. I sell high-modulus Carbon Fiber tubes in 30mmOD x 26mm ID, which is the standard for most European pipe guns. Using a 30.22 mm round bit to cut the tube track on the wooden stock, the tube aligns to the stock without jigs. You can use one of many commercially made muzzles that adopts the 26mm ID tube, no need to fabricate a special muzzle. If you don't have the woodworking tools to cut a mechanism or handle pocket, Neptonics has a bunch of pre-made stocks at the Long Beach shop that already has the mechanism and handle pockets already cut. You just need to cut it to length, cut the round slot, glue the tube in place and mount all the hardware. The carbon tubes are 170cm long, so you can cut it in half and make two hybrid guns out of one tube.
kory bersuch wrote:
Users browsing this forum: Trace