An online forum for spearfishermen around the world.
castronova wrote:Never had a problem CF fins in a sport tube. I usually strap a gun to each side, fill in between the 2 guns with floatlines and floats, mask/snorkel, etc. up to the middle then slide the fin blades down the side and the foot pockets fill in between the guns at the top.
castronova wrote:Use schedule 20 PVC with end caps for shafts or tip protectors or even a cardboard tube with end caps and a screw. PVC is best because you can put on the boat/panga whatever, when you go diving and have all your spare shafts nice and neat. I usually travel with a lot of shafts so all that cable will not fit in a tube. I just cut a 3" long 1/8" slit down from one end of the pipe so all the lines slide in and the loops can stick out of the tube then put the cap over and it holds snug. I mostly use small zip ties for line management but lately I've been using the wire ties from loafs of bread of ice bags and they are even easier and of course free.
Obviously that has nothing to do with CF fins but...
Users browsing this forum: Bakir_sonic, Google [Bot]